Balance Doesn’t Mean Boring: CSF’s 300whp & 250,000 mile RSX
A Familiar Tale

Keep it a sensible daily, kit it for the track, or turn it into a show build? It’s a tough choice many of us have faced, and an even harder one to stick to. I can’t think of many daily drivers which stay stock for long, and before you know it they’ll never see the streets again. Then you need a new daily to replace your old daily.

Unless you’re Ravi Dolwani from CSF Radiators.

CSF - RSX - Speedhunters - Keiron Berndt

In a time not too long ago, when we were allowed out of our houses, many of us had to commute to our jobs, drive to the shops, and run all sorts of errands. If you’re anything like me, you end up wondering which of the cars you own might stand a chance of making it. Which half-finished mod is just-finished-enough to get there and back – if any? If that’s too risky, maybe I can take one of the motorbikes, or cycle. Perhaps I should simply walk?

Walking isn’t the same as driving, though. Even a momentary blip to the redline is enough to fill you with joy. That’s when you end up buying a new daily driver, start mucking about with it, and end up back at square one. This is the cycle of car life.

CSF - RSX - Speedhunters - Keiron Berndt

This is the very personal story of Ravi’s daily driver – a car that found him. The 2006 Acura RSX Type S was already in the Dolwani family; Ravi’s sister owned it through college, driving it everywhere, every day. But after college she moved to San Francisco where the combination of steep hills, the RSX’s limited torque, and a manual transmission didn’t make for an easy commute. Ravi was asked to sell it on her behalf, but he fell for it himself.

CSF - RSX - Speedhunters - Keiron Berndt
How Much Is Too Much?

When Ravi purchased the car it was completely stock, bar wearing considerable ‘patina’ after being well used for 15 years. It’d been maintained extremely well, but time had taken a toll on the interior and paint. For most people this would trigger a small renovation, maybe some new upholstery and replacement trim panels. Not for Ravi, though. He always goes pretty big. If you check out some of Ravi’s past projects on the site you’ll know what I mean. Think a 1,000hp 991 Turbo and an Evo X race car to name just two.

CSF - RSX - Speedhunters - Keiron Berndt

As always with these builds, the ideas started as a tiny seed and quickly bloomed into a giant oak. After four years of commuting in the car, Ravi thought about restoring it to near showroom condition. After all, a stock RSX makes a great daily driver and with a few simple handling upgrades can be the perfect canyon carver. Cue searching for wheels, interior trim, and of course a few additional engine ‘tweaks’.

But the more Ravi planned, the wilder the vision became, then the time came to pull the trigger. Why not build the ideal daily driver with just enough power to be fun from stoplight to stoplight, and still be comfortable on the 100-mile trip from home to office?

CSF - RSX - Speedhunters - Keiron Berndt
Dressed Up From Head To Toe

The good thing with Ravi’s mentality is he knows not to bother kidding himself with the work involved in a proper build. Wanting to keep the motor naturally aspirated, Ravi knew the best process would be a full teardown and rebuild followed by replacing (and upgrading) just about every component in the motor. A 2.4-litre Honda Accord block formed the base of the build before JE forged pistons, K1 forged rods, nano-coated bearings and ARP studs were all added.

Moving up top, Ravi and the builders at MotoIQ went with a Drag Cartel CNC Pro Series RBC cylinder head, DC billet cams, Supertech valves and dual springs, an RBC intake manifold and K-Tuned 88mm throttle body.

With all of this bolted back together, Ravi’s RSX now boasted a high-compression (11.75:1) engine robust enough to drive on the street but packing a might punch. An Eimer Engineering 3-inch stainless exhaust and WiFi-controlled valve take care of the soundtrack, while a Wavetrac limited slip differential puts 300 naturally aspirated horsepower to the floor. This all makes for a proper riot on the street.

CSF - RSX - Speedhunters - Keiron Berndt
Style Matters, Inside & Out

Performance sorted, Ravi’s next task was the bodywork. Californian sun is harsh on paint to say the least, especially given the fact that, being in a desert, when it does rain in California it’s usually acidic. That’s the last thing you want baking into your paint.

Combine this with driving a car every day for 15 years and dings, dents, and scratches are unavoidable. Who do you call when you need a speedy transformation? Long Tran and the guys at LTMW of course.

Not that Ravi kept it entirely standard. While in for a tidy up he opted for a full Integra Type R body conversion, which included repainting the whole car and repairing the tired bodywork. Do it once, do it properly.

CSF - RSX - Speedhunters - Keiron Berndt
CSF - RSX - Speedhunters - Keiron Berndt

Wing, headlights, badges, side markers and bumpers were all converted to the highly-sought-after JDM DC5 Type R goodies. But Ravi wasn’t done there.

CSF - RSX - Speedhunters - Keiron Berndt
No Stone Left Unturned

Next on the chopping block was the place where Ravi would be spending all his time when driving – the interior. As previously mentioned, the Eimer Engineering exhaust and valve combo are absolutely perfect with zero drone on the highway while delivering just the right amount of ‘Honda’ rasp at high revs.

CSF - RSX - Speedhunters - Keiron Berndt

Since Ravi’s commute could vary between 45-90 minutes, a new sound system with Apple CarPlay meant the long drive and interior became the perfect place to host conference calls. But what’s an office without comfortable seats? Out came the OEM RSX Type S recliners and off they went to get wrapped in some perforated black leather with red stitching.

CSF - RSX - Speedhunters - Keiron Berndt

Other goodies include a custom Alcantara-wrapped Type R steering wheel to match the seats, Chasing J’s x CSF weighted shift knob in gold/raw titanium, and a Chasing J’s custom handbrake button in polished brass.

Only One Thing Left
CSF - RSX - Speedhunters - Keiron Berndt

With all the bits together and ready to roll, the last thing to do was dot the i’s and cross the t’s, and for Ravi that meant dressing up the car with a set of RAYS Gram Lights 57CR wheels. It’s a square 17×9-inch +38 setup wrapped in 245/40R17 Toyo Proxes R888R tires all around. Wheels make or break the car and these are the icing on the cake.

CSF - RSX - Speedhunters - Keiron Berndt

You’ll spy through the wheels that the brakes are not stock either. More forward propulsion meant a greater need for stopping power, and Ravi went for a StopTech slotted front brake kit with StopTech slotted rear rotors. Stainless steel brake lines and pads complete the upgrade.

CSF - RSX - Speedhunters - Keiron Berndt
CSF - RSX - Speedhunters - Keiron Berndt

Under the bonnet is where the real party is, and it’s drenched in one-off custom dress-up parts. To match the care and attention inside the engine, the folks at Chasing J’s went all out and devised a custom CSF valve cover plate and titanium hardware throughout. Nothing is untouched in here; from the dipstick to the hood prop, it’s all Ti.

CSF - RSX - Speedhunters - Keiron Berndt
CSF - RSX - Speedhunters - Keiron Berndt

Now all that remained was for Ravi to drive it, and believe me he has. After nearly 10,000 miles Ravi is more in love with his RSX than ever, and I don’t blame him. It’s a brilliant example of how loving a car can pay dividends in enjoyment. Sure, it doesn’t make one ounce of financial sense on paper, but car life isn’t about that. It’s about how it makes you feel when you turn the key, when you blip the throttle, and when you catch a corner nicely.

But with all this said, my favourite thing about this car is its one remaining flaw: the hole in the driver’s floor mat. It’s a brilliant reminder that this car has served up 250,000 miles of revvy, NA fun in its lifetime.

Keiron Berndt
Instagram: keiron_berndt

Ravi Dolwani’s 2006 Acura RSX Type S

Engine:
Honda 2.4L K24 block, JE forged pistons, K1 forged rods, King bearings, Drag Cartel Pro Series CNC-ported RBC cylinder head, Drag Cartel billet camshafts, Supertech black nitrided intake/exhaust valves, Supertech dual valve springs, JE Pro-Seal head gasket, ARP head studs, RBC intake manifold & adapter plate, K-Tuned 80mm throttle body, DeatschWerks 340lph fuel pump, K-Tuned fuel rail with pressure gauge, DeatschWerks 450cc injectors, 4P oil pump kit, Fluidampr crank pulley, ASP header (small tube with 3-inch v-band outlet) CSF Racing Radiator (CSF#7000), K-Tuned hoses, Eimer Engineering custom titanium cold air intake, Eimer Engineering custom 3-inch stainless steel exhaust, Antigravity lightweight lithium battery, 2004 Type S donor ECU, Hondata K-Pro & adapter harness, Innovative front mount, Hasport rear mount, custom Chasing J’s x CSF gold/raw titanium 3D logo valve cover plate, Chasing J’s gold/raw titanium dress-up hardware

Driveline:
RSX Type S 6-speed manual gearbox, McLeod Street Elite clutch & flywheel, Wavetrac limited slip differential

Suspension & Brakes:
KW V2 coilovers, Whiteline LCA bushings, Hardrace roll center correction tie-rod ends & ball joints, Whiteline 22mm front sway bar, Whiteline 24mm rear sway bar, Whiteline sway bar end links, ASR rear subframe brace, SHG Steering Rack Insert, StopTech slotted/coated Trophy front brake kit, StopTech rear slotted rotors, Centric rear calipers, braided stainless steel brake Lines, StopTech 600 brake fluid

Wheels & Tires: 
Custom powder-coated RAYS Gram Lights 57CR 17×9-inch +38 front/rear, Chasing J’s gold/raw titanium closed-end lug nuts, Toyo Proxes R888R Tires 245/40R17 tires front/rear, Chasing J’s gold/raw aluminum valve caps

Exterior:
Honda DC5 Integra Type R bumpers, headlights, rear Wing, side markers & badges, rear wiper delete, full respray & paint correction by LTMW

Interior:
Custom Alcantara-trimmed Honda Integra Type R steering wheel by Rogelio’s Auto Upholstery, K-Tuned billet shifter, custom Chasing J’s x CSF gold/raw titanium weighted shift knob, custom Chasing J’s polished brass hand brake button, Pioneer AVH-2550NEX 6.8-inch receiverChasing J’s Hood Prop in Gold/Raw Titanium

Acura related stories on Speedhunters

ADVERTISEMENT

Comments



Comments are closed.

17 comments

by Oldest
by Best by Newest by Oldest
1

beautiful build. love that he kept it NA

2

This must sound absolutely NUTS

3

Gorgeous engine bay and gorgeous photos Kieron!

4

Fantastic story and what a spec! Very aspiring stuff. As an ITR owner myself it's great to see someone who is also like minded and uses an an Integra to their fullest potential. I love the simplicity of these cars, they just do everything I want from a car, great daily driver, the odd track day, grocery 'getter' and even with the standard K20a they're still loads of fun and decent of fuel!

5

Great Cars, Great People. I cannot stop looking at the First Photo and the Adventures and Drive I can make with the RSX if I have one. #dreamcar

6

A 2006 model + 15yrs of ownership? Are we living in 2021?

7

You can usually buy a car in the fall before that model year. For instance, probably bought in fall 2005 as a 2006 model.

8

My driver's floor mat looks exactly the same. It got so bad I had to stick a metal plate over the hole to keep from wearing a hole straight down to the floor pan.

9

This has to be the best RSX build ever!
Just perfection

10

Man the RSX is an underrated car
It is one of Honda/Acura's best cars and it is indeed the new Integra

11

My vehicle- 1998 Audi A4, 270,000 miles.
-full bolt ons
-k04s Turbo tuned @24psi
-orignal trans
-original internals and block, never opened.

I did the timing belts and regular PS pump, alternator and major wear components. Otherwise the vehicle has been my bulletproof DD. Love seeing high mile builds. "Hey man, at least you know it wasn't a lemon!"

12

Maybe It's Intentional as well that he left a rusted bolt on the engine bay shown on the Intake picture, as he has a new Bolt next to the old one .

13

Damn I miss my RSX

14
Jay Soh Tsu Chung

It's just insane he has to commute 100+ miles everyday just to get to work and back.

15

This is an amazing piece, love the photos, and absolutely love the story behind this build! The quality, attention to detail, and the purpose behind it all is amazing to me. It all plays so well together as a whole. It truly does have an amazing balance to it, perfect title for this one!

16

He doesn’t have to commute, csf sits at the southern end of one of the nicest communities in America, especially the northern end. It’s sad to think of how much time he wastes in his life to claim that Newport Beach address. Certainly he could move operations to Costa Mesa or Irvine

17

What FK8?

OFFICIAL SPEEDHUNTERS SUPPLIERS