Project FJ: Just Add Sand
Spoiled For Choice

I’m so spoiled when it comes to shooting locations.

With the beach, amazing canyon roads, and the urban sprawl that is downtown LA just minutes away from my house, it’s sometimes hard to decide where to shoot in Los Angeles.

That is, of course, if you are shooting a vehicle that’s bound to paved roads. If you drive a few more hours from Los Angeles you end up in all sorts of weird places – amazing off-road trails, dry lake beds, and even sand dunes.

Larry_Chen_Sema_2017_BTS_002

There are a few areas in Southern and Northern California that have very famous dunes, including Glamis. Recently I did a shoot in the Dumont Dunes, and it was so visually stunning that I knew I had to go back out there just for fun.

Larry_Chen_Sema_2017_BTS_003

A few weeks ago I called up my buddy Linhbergh, and we hit the road together; two Japanese off-road vehicles ready to play in the sand. However, before I went I wanted to equip Project FJ with some new wheels and tires.

Larry_Chen_Sema_2017_BTS_004

The Yokohama Geolandar M/Ts on the truck had served me well for a few years, but I could tell they just didn’t have as much traction as they did when they were new. That’s to be expected though, given just how many harsh off-road miles I’ve put on them.

Larry_Chen_Sema_2017_BTS_005

Enter the all new Yokohama Geolandar M/T 003. I got them in 285/70R17, which is 33-inches tall.

Larry_Chen_Sema_2017_BTS_006

And for my new wheels? I went with the Rotiform SIX-OR in matte bronze. I think they fit the truck’s JDM-style theme perfectly.

I loaded everything up into the FJ and drove to the local tire shop just down the street from my house.

Larry_Chen_Sema_2017_BTS_011

I was very excited to be fitting up my first set of Rotiforms, but even more excited that they were an inch wider than the Enkei ST6s that I had on the truck previously. I’d be able to have the look that I wanted, without needing to use spacers. These SIX-ORs are 17×9-inch with a bolt pattern of 6×5.5, which fits most Toyota six-lug applications.

My tire shop is used to me bringing all sorts of wheels and tires for different cars for mounting, but I wouldn’t be surprised if they thought I was a drug dealer. Little do they know it’s worse than that: I am a petrol head.

Larry_Chen_Sema_2017_BTS_016

With the new Yokohamas mounted on the new Rotiforms, I loaded everything back in my truck and headed home.

Larry_Chen_Sema_2017_BTS_019

Before I fitted them on the FJ I figured it would be fun to see what it would look like if I turned my 996TT into an off-road rally machine. Since this does exist in the real world, it didn’t look half bad.

Larry_Chen_Sema_2017_BTS_020

Better yet, how about an open-wheel 240Z rock crawler? There is such a thing as a Safari 240Z too.

Larry_Chen_Sema_2017_BTS_021

Somehow the bronze actually matches in with the color scheme I have going on with Ole Orange Bang.

Larry_Chen_Sema_2017_BTS_022

Enough silliness; I swapped my old rusty lugs for brand new lugs and headed for the sand.

Dumont Dunes
Larry_Chen_Sema_2017_BTS_023

I’ve driven over quite a few sand dunes with the FJ: Glamis, Olancha, Apex outside of Las Vegas, and even Pismo Beach. The Dumont Dunes are seriously the largest I have ever seen though.

Linhbergh was behind the wheel of his super-tricked-out Mitsubishi Montero, but as it was his first time driving in the dunes we had to take it slow at first.

Larry_Chen_Sema_2017_BTS_026

The margin of error is very small, and things can go from good to bad very quickly if you stop in the wrong places or are a few inches too close to the edge of a drop off.

Larry_Chen_Sema_2017_BTS_027

It’s always tough to have any traction in the dunes, but airing the tires down to 15psi helped quite a bit.

Larry_Chen_Sema_2017_BTS_028

The most important thing to me about off-road wheels is durability: knowing that I won’t get stuck on the trail due to a cracked wheel is key. I could miss out on an entire race if something disastrous like that happened.

Larry_Chen_Sema_2017_BTS_029

The one-piece monoblock cast SIX-ORs are very strong. In this size they weight in at 31lbs each, but that’s negligible for off-roading as a tire alone weighs twice as much. Rotiform does make a forged version of this wheel, but I figured it would be overkill for something I’m going to literally beat up anyways.

Larry_Chen_Sema_2017_BTS_030

Lucky for Linhbergh and I, there was barely any wind. Driving in the dunes during a sandstorm is not something I would recommend.

Larry_Chen_Sema_2017_BTS_031

I’ve been getting back into remote control cars recently and trying to get a scaled-down version of each one of my project cars. I already have the 1/10th scale 996 Turbo, and recently HPI Racing came out with a 1/10th scale rock-crawling FJ. I knew I had to bring it along for some fun.

As Linhbergh quickly learned, driving in sand is not as easy as you think it might be. You always need to make sure you are stopped facing downhill, and if you start getting stuck you need to back off and go back down to where you came from, or else you might be in for a long night of digging.

Larry_Chen_Sema_2017_BTS_036

The last thing I wanted to do was to get one of us stuck, or worse, both of us stuck in a ditch, especially given that very few people are out enjoying the dunes during a weekday.

Larry_Chen_Sema_2017_BTS_040

While our two builds could not be more different, Linhbergh’s Mitsubishi proved pretty capable in the dunes, even though it’s only seen over-landing duty – hence the huge rooftop tent and solar panel. This rig was built for living off the grid for weeks at a time.

Larry_Chen_Sema_2017_BTS_042

By comparison, my truck was built for chasing the Baja 1000 and racing events like King of the Hammers.

Larry_Chen_Sema_2017_BTS_043

The sun was setting and it was time for us to get some of our last shots in. I could not imagine a better day spent off-roading.

Larry_Chen_Sema_2017_BTS_049

Thanks to Linhbergh for tagging along and letting me use his photos for this story.

Larry_Chen_Sema_2017_BTS_044

So what’s next for Project FJ? I want to install a hidden light bar, and maybe improve the armor. Front and rear bumpers are also on my to-do list. But for now I am going to enjoy it by going off-road as much as I can – that is what a 6-speed manual FJ Cruiser is built for, right?

Larry Chen
Instagram: larry_chen_foto
larry@speedhunters.com

Additional Photos by Linhbergh

More FJ Cruiser stories on Speedhunters.

Cutting Room Floor
Larry_Chen_Sema_2017_BTS_045
Larry_Chen_Sema_2017_BTS_046
Larry_Chen_Sema_2017_BTS_047
Larry_Chen_Sema_2017_BTS_048
Larry_Chen_Sema_2017_BTS_050
ADVERTISEMENT

Comments

Add comment

E-mail is already registered on the site. Please use the Login form or enter another.

You entered an incorrect username or password

Sorry, you must be logged in to post a comment.

38 comments

by Oldest
by Best by Newest by Oldest
1

That's it. I'm getting a ZJ. You can't have all the off-road fun here, Mr. Chen.

Author2

You won't do it.

3

WATCH ME. ;p

4

Nice set of wheels. I prefer the H/T over the M/T, i don't know if it's available on your side and the performance on your terrains which could be very different.

Let me suggest a new target: a 1/10th Rotiform SIX-OR.

5
Keaton Belliston

Are those beadlocks fake? If so, I'd expect better from Rotiform...

6

Then you'd also expect better from KMC, Method, Robby Gordon Wheels, American Racing, Mickey Thompson, and the many other companies who make beadlock look wheels. Beadlocks are just like any other multi-piece wheel in that they require maintenance and checking the bolts on the beadlock ring are torqued down periodically. Not everyone wants that or even needs it as you only use beadlocks in situations where you need to keep a tire bead from popping off the bead seat during extreme low-pressure usage (below 20-psi). Otherwise, if someone wants the look, they have the option.

What I wouldn't mind seeing is more wheel companies mimic Ford Performance's Raptor Wheels. You can run the beadlock look but when you want real beadlocks, you change the wheel face with a true beadlock ring. However, even with that OE option wheel you still have to maintain it and you still have to run street pressures when you're not wheeling.

7

Yeah, but all the wheels you listed are junk.

Author8

Lol.

9

This look like very amazing and royal I like all the care which has the most attraction for the tourist and also want ride in the desert http://myglobalclip.com. One of the most charming look here the real look of the cars is very important. Thanks a lot for allow me comment here.

10

I miss Linhbergh. His shooting style captivated me when he first came to SH almost 10 years ago, and this was a sweet reminder of those times.

#bringbackfulltimelinhbergh

11

#dicksoutforlinhbergh

12

Our doors are always open for Linhbergh.

13

Gah damn, imagine if you got those sports car riding at stock height but with 33 inch tires. That's an interesting concept. And also how do the lug nuts get beat up THAT bad to consider replacement sheesh? Nonetheless, satisfying comparing the old with the new.

Author14

Salt and from being off-road. Every mile I put on this truck is off-road or on my way to an off-road location.

15

I don't imagine seeing salted roads in Southern California, where it rarely snows. Where is all this salt coming from?

Author16

I drive it far, I've been to Utah during the winter and I go snowboarding quite a bit in California.

17
Brennan McKissick

I've always loved the FJ Cruisers. They hold their value really well (like every other Toyota). Moving back to Brooklyn this Spring though so I don't think a car will be in the cards for a while but an FJ would make a great getaway car when we can swing it.

18

Larry, Space Race Vinny in his 4Runner with your FJ...

Author19

That's a good match, but mine is 6spd manual. Maybe he will have a start advantage unless I drop the clutch.

20

If you do it will you give me a shout out for the suggestion? You just made my day Larry, saw this post right before I got handed a customer to call who bought a 2012 FJ with the off-road goodies!

Author21

Awesome, I'm sure he will enjoy it.

22

Always good to see an update on the FJ. New wheels are next on the list for my LX but they're hard to find with the 5x150 bolt pattern that don't look gaudy.

Author23

You're telling me. That's what I'm building right now as my new family wagon / production vehicle. Two small kids in the FJ doesn't work with the baby seats. I'm sad Ray's discontinued the TE37 pcd 18 inchers

24

100 or 200 series? Method makes some nice stuff but they're for Tundras so you'd have to run spacers to clear the LC/LX's giant dust caps

Author25

It's a 200 series, but the first year. It's such a different beast versus the FJ.

26

I want a 2008-2010 next if the engine swap I want to do turns out to be impossible (the only downside is power in a 100). Hopefully we'll get a post soon on yours. You'll be amazed at how heavy duty everything is underneath when you dive into it if you haven't already.

Author27

I've done a few things to it so far, but it's just a perfect truck from the factory.

28

When we going to see you going big in this on Daily Transmissions Larry?

Author29

Haha, keep commenting on my videos. Every little bit helps.

30
Sebastian Motsch

It's great to see Linhberg and his unique photography again. Larry Chens FJ Cruiser inspired me to this photoshop chop.
Best regards from Germany, Sebastian.

decom_af481cd3d4be6e4d4869ef06b84c6034_5a7a3f477622f.pngdecom_af481cd3d4be6e4d4869ef06b84c6034_5a7a3f477622f.png
Author31

As if it's not hard hard enough to see out of already. I do have to say it looks great.

32
Sebastian Motsch

Thank you Larry, much appreciated.

33

Damn, your ‘old’ tires have more tread on them than my last 2 sets put together.
#broke

34

larry, please drive more of this and share it with us ^____^ and man you have a really really great set of project cars. 996 , 240z and fj

Author35

I will try to update you guys as much as I can.

36

Y no updates for ze 911? or ze Z?

37

It really needs the ARB bumpers. They really toughen the FJ's up. (And old Orange Bang really needs those wheels!)

38

Fack Larry, those wheels are the tits!

OFFICIAL SPEEDHUNTERS SUPPLIERS