Meeting The Jdm Legends

The internet, and more specifically our little car-focused corner of the internet is a strange place. On one hand it’s an enormous, global community – one that’s constantly changing and growing by the minute. On the other hand, it’s also made the world smaller, as car enthusiasts from across the world connect with each other to exchange ideas and build new friendships that would have never been possible 20 or 30 years ago.

During my journey as a Speedhunter, I’ve had the opportunity to meet some great people, both in person and via this magical internet thing. One of these people is Eric Bizek of JDM Legends in Salt Lake City, Utah.

Eric and JDM Legends have been featured here on Speedhunters a couple times in the past, and I finally had the chance to meet him last month during the Bayline Meeting in Northern California. When I talked with Eric at the meet, I made a promise that I would drop by and see the shop while I was in Utah for Bonneville Speed Week.

So that’s how I found myself standing inside the garage at JDM Legends last Monday after making the two hour drive from Wendover into SLC.

After being greeted by Eric, the first car that caught my eye was this white two-door Hakosuka Skyline that was undergoing some work on the lift.

The car arrived from Japan as a nearly stock 2000 GT-X model, and right now it’s in the process of getting the popular GT-R body conversion, including both front and rear over-fenders. Hardcore Hakosuka fans will know real KPGC10 GT-Rs do not have flares up front, but it’s become such a popular look that it’s common practice to do the fronts as well.

Here you can see the dramatic difference between the GT-R style fender and the stock Hakosuka “surf line” rear fender. If I were fortunate enough to have my own Hakosuka, the decision of whether to keep the stock rear fenders or go with a flare would be a tough one. What do you think?

Besides just a few tiny spots of rust, the Skyline was in fantastic, very original condition both inside and out.

One of the few modifications that was on the car when it arrived from Japan was this sexy Fujitsubo full exhaust system.

If you were looking to take home this particular Skyline, you are out of luck I’m afraid. This car will soon be on its way to its new owner in the Chicago area.

One of the most exciting projects going down at JDM Legends right now is this SA22C Savanna RX-7, which is essentially going to be a demo car for the shop.

The car is a legit JDM model, equipped with the fairly rare 12A turbo motor. Eric isn’t quite sure what they will do the engine, though he likes the idea of keeping the 12A for the originality factor. He mentioned perhaps adding an upgraded turbo kit in the future.

The body on the other hand, is getting quite a makeover and the car is already shaping to be one of the coolest first generation RX-7s on US shores.

The aggressive aero kit was sourced from Japan and is based on the factory IMSA GTU RX-7 race cars…

…as well as this aggressive rear spoiler from Mariah Motorsports in California. Depending on how you look at things, it could be either a fine competition replica or an absolutely bitchin’ kaido street racer.

Fitting beneath the giant flares will be an equally beefy set of 15″x10 and 15″x11 Work Meister CR 01s with mildly stretched Toyo R888 rubber.

The livery on the car is actually going to be done as a replica of the black and gold Hot Wheels RX-7 which features the JDM Legends logo. There are countless diecast replicas of real cars, but how cool is it to see a real car inspired by a diecast? At the moment the guys are working like crazy to have the car done in time for JCCS in Long Beach next month.

Besides the cars themselves, the JDM Legends shop is littered with all sorts of cool vintage car related artifacts. There are piles of parts…

…along with plenty of wheels and tires.

There a book shelves filled with classic Japanese car publications – all for research of course.

There’s even a set of Weber sidedraft carbs to be admired in all of their beauty.

The coolest of all may be the “wall of fame” which is covered in photographs, stickers, car parts, and other vintage Japanese goodies. The passion behind the whole operation is obvious.

There are even a few complete engines sitting around the shop, like this Toyota 2TG. It could surely be put to good use under the hood of car, but it looks so good just sitting there on an engine stand!

Naturally, it’s outfitted with a set of Mikuni sidedrafts.

Aside from the work area, there is a second half of the shop which is right now being used mainly for car storage.

Here you will find the DR30 Skyline that recently made the road trip to California for the Bayline Meet. This is one of the first cars that JDM Legends brought over when the business started a few years ago.

This Datsun 510 is a customer project which is just nearing completion.

It wasn’t a complete build, but the shop did some finishing work on the car’s SR20DET swap.

Not quite a classic, but Eric’s fully built GC8 Impreza  is also mixed in the bunch. It’s out of commission at the moment after it blew an engine during a track day at Miller Motorsports Park.

This Celica liftback is a car that’s been in the JDM Legends fleet for a long time, but progress has been slow with all of the customer work and freshly imported cars coming in and out of the shop.

It’s got a turbocharged BEAMS 3SGE swap, and once it’s complete (which could be a while) it should be one hot machine.

Sitting beside the Celica is another bare metal project which still has a long way to go, a US market 240Z in this case.

This green four-door Hakosuka is another one of JDM Legends’ early cars.

It’s owned by Ryan Rudd, who besides Eric is the only other JDM Legends employee at the moment. Ryan actually used this car as his everyday commuter for a long time before he picked up a Lexus LS400 as his new daily.

Eric’s personal vintage project is this proper looking KP61 Starlet…

…which is sporting a 16-valve 4AGE swap and plenty of other high performance goodies packed into the featherweight chassis.

Eric says he would love to have a Hakosuka of his own someday (and who can blame him after spending his days working on them), but for now he’s really enjoying life with his KP61.

Just a few hours after I left the shop to return to Wendover, the shop received their latest shipment of cars fresh from Japan.

One of the cars that came off the truck was a first generation Mazda Cosmo – the first one JDM Legends has ever imported.

Needless to say, Eric and Ryan were quite excited to have this rotary-powered classic roll into the shop.

The other car that came off the truck is slightly more traditional, but no less impressive. It’s a two-door Hakosuka with GT-R looks and a built 3.0l L-series under the hood. Eric says he’s quite addicted to the Hot Rodded L-series after importing Eric Bauer’s red car.

If you happen to live in the United States and have dreams of picking up a classic JDM machine for yourself, you know where to go.

A big thanks go to Eric and Ryan for taking some time out of their busy schedule of doing GT-R conversions and building demo cars to show me around.

-Mike

JDM Legends

ADVERTISEMENT

Comments



Comments are closed.

6731 comments

by Oldest
by Best by Newest by Oldest
1

Ah my fantasy garage!! Haha. Love that beams 3sge, got one myself :D waiting to be put into something...haha great write up.

2

Ah my fantasy garage!! Haha. Love that beams 3sge, got one myself :D waiting to be put into something...haha great write up.

3

Ah my fantasy garage!! Haha. Love that beams 3sge, got one myself :D waiting to be put into something...haha great write up.

4

Ah my fantasy garage!! Haha. Love that beams 3sge, got one myself :D waiting to be put into something...haha great write up.

5

Ah my fantasy garage!! Haha. Love that beams 3sge, got one myself :D waiting to be put into something...haha great write up.

6

ive got one too, will be setup with ITBs in an altezza by monday
 

7

FAWK YES. in love

8

I wish there were more pics of Ryan's Hakosuka. I love that look

9

god damn I need to get into the car importation business... Some awesome metal there.

10

Jeez that SA22C! Can't wait to see the finished product!

11

Thumbs up for JDMLegends!

12

Yes! I've been looking forward to this article since I talked with you at the Bayline meet! haha Thanks for the coverage!

13

I love that shop. Always making proper cars. Ever since I saw the video with a few of their builds I have been hooked. Keep it up guys, hopefully someday I can visit you.

Author14

 @TreyFiveOhJoe The feeling is like wise!

Author15

No problem Rob. Glad you enjoyed it!

16

i have that hot wheels and i'm so glad there making a real life version it looks sooo sick.

17
Urban_Monkey_55

Man, I know they will clean it up, but that Skyline sure had more than "a little rust" on it judging from that exhaust shot. How bad are the cars in Japan typically, rust wise (I'm sure it depends on the area they come from)?
 
 

18

@simon: do you have a thread of doing this to your tezza - thinking of doing the same on mine 
 
great garage, cool cars! Love this old J-tins so much 

19

 @Urban_Monkey_55  Ha ha...  That car is actually very clean but Mike found one of the problem areas.  Luckily it's all minor surface corrosion back there and it will be an easy fix (and yes it will be taken care of before it leaves).  We'll get a blog post of this car up soon on the company website if you would like to check out the process.  Thanks for the feedback!

20

Thanks for the feature Mike!  It was an honor having the  Auto otaku I've been following since your days near Tsukuba at our shop.   Next time we make our way through California we'll have to meet up and go for a cruise in that S30 of yours...

21

These guys at JDM Legends are truly badass!! Having the honor of meeting them at the Bayline Gathering was a day I'll never forget. I can't wait to see them at JCCS!! Thanks Mike for this awesome feature!!!

22

Hopefully one day I will be making an order with your guys (JDML) for a Hakosuka of my own and then I will make the flight from Canada to Utah to pick it up.   

23

SQUEEEEEEE!!! http://www.gearheadshirts.com on the wall of fame!!! What an honor! Thanks guys!

24

We've got that design on sale in black and red now BTW :) http://gearheadshirts.com/products/496223-ta22-celica-cutaway

25

Besides the awesome cars the JDM guys are really nice guys and this makes all the diference. I wish them all the best.

26

JDM Legends posts are always welcome here. If i didnt want to do the work on my 240Z, these are the guys that I would take it to. They do really great work from what i have seen on their website. I know they track down great jdm cars to import but do they also track down wheels? So many great old school wheels out there in japan.

Author27

Anytime man! Hopefully she will be running smooth by then. Haha

28

Older Japan cars are pretty rusty.  There is an annual rain season, most of the cities are close to the ocean, the areas that are not get heavy snow, garaged parking is relatively scarce, etc..  Old Z-car bodies are commonly imported from the US because many have less rust. 
I agree with Mike that this Hakosuka is rather clean regarding rust! 

29

good luck with the Cosmos!  Friend and owner of TRIAL here in Osaka recently purchased one and is always having problems with it!

30

Agreed on your statement about Eric being one of those great guys who happens to be into cars.  Eric has done an amazing job building up JDM Legends and has only success in his future.  Way to go Eric!  A much deserved feature!

31

Sooooo jealous of this business! I wish I could start something similar on the east coast... Keep up the great work guys!

32

To that I'd say make sure to clean out the fuel tank and the rest of the fuel system. I read an article recently about a magazine test-driving a Cosmo and they kept having to replace the fuel filter every few hundred miles from the fuel tank disintegrating on the inside.

33

Awesome looking workshop, and I can't wait to see that RX-7 finished! I was thinking about doing similar graphics on my black RX-7 too, so it'll be interesting to see how this turns out. :)

34

OMG COSMO IN THE US! WIN!

35

A COSMO IN AMERICA?

36

A COSMO IN AMERICA?

37

My first car was a 1967 Datsun SSS 4door with a 4speed, 1600cc, and dual carbs. I loved that car. At 15, I thought I had a race car. Wish I still had it
Kirk

OFFICIAL SPEEDHUNTERS SUPPLIERS